NEW: Rotating Base RB-180

Rotate your Tormek!

Alan Holtham RB-180

Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the new Tormek Rotating Base RB-180, you can easily rotate the machine 180° to select the ideal sharpening direction. It also makes it simple to switch from sharpening to honing!

Tormek T-7 on the Rotating Base RB-180

Tormek T-7 with the new Rotating Base RB-180. It is now an easy task to rotate the machine 180° to change sharpening direction or to switch between sharpening and honing.

A priority during the design process has been to make the RB-180 as thin as possible in order not to affect the working height. You easily turn the machine without any heavy lifting or water spillage. The rubber feet absorb the normal vibrations and make sure that it rests firmly on the table. The RB-180 will fit the Tormek T-7 and T-3, the 2000 and 1200 Series plus the SA-250 and N-1500.

RB-180 side view

The platform has been designed with a frame, which keeps the machine firmly in place. The design is as thin as possible in order not to affect the working height.

RB-180 corner view

It is constructed from three optimal high performance materi­als to ensure a low friction and high stability.

RB-180 locking

It automatically locks in position.

Where to buy »