Jig Solutions

Which jig should I use?

SVM-45 Knife Jig

Knife Jig

For most knives. Width 45 mm (1¾"). Long knives need to be stiff. Min. blade length 60 mm (2 3/8"). Also for carver’s draw knives. The jig rests freely on the Universal Support so you can follow the curve of the blade. Read more »

SVM-00 Small Knife Holder

Small Knife Holder

The new SVM-00 holder works in conjunction with the Tormek Knife Jig SVM-45 and opens up the ability to work with complete control on a much wider range of small knives. Read more »

SVM-140 Long Knife Jig

Long Knife Jig

This new knife jig is developed especially for long and flexible knives, e.g. filleting knives. Its larger width, 140 mm (5½"), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6¼"). Read more »

SVX-150 Scissors Jig

Scissors Jig

For scissors and shears. The scissors is mounted in a holder, which supports freely on a support plate so you can follow the individual convex shape of the scissors. Also for portable electric hand planer blades. Read more »

SVA-170 Axe Jig

Axe Jig

For carving and carpenter’s axes. The head of the axe supports freely on the rubber lined stop so you can follow the shape of an individual edge, straight or curved. Read more »

SVS-32 Short Tool Jig

Short Tool Jig

For straight shanked tools, such as wood chisels, carving gouges and tools for power carvers. Flanges ensure a 90° positioning of the tools towards the grindstone. Copes with tools down to 45 mm (1¾") length and max width 32 mm (1¼"). Read more »

SVD-185 Gouge Jig

Gouge Jig

For an exact replication of the shape on fingernail shaped turning gouges. Can be set for various lengths of the side bevel. Plus shaft for turning cutters. Also for bent carving gouges and V-tools. Max tool width 25 mm (1"). Read more »

SVS-50 Multi Jig

Multi Jig

For an exact replication of the shape on turning skew chisels with a straight or curved edge. Thanks to a unique design the jig also copes with oval section skews. Also for parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2") wide. Max width of skews 32 mm (1¼"). Read more »

SVD-110 Tool Rest

Tool Rest

For turning scrapers, hollowing tools and thin parting tools. Also for cabinet scrapers, screw drivers and spoke shave blades. Fast and secure locking on the Universal Support due to the patented design, which increases the locking force by 250%. Read more »

SE-76 Square Edge Jig

Square Edge Jig

New, patented design. For plane irons and wood chisels. Aligns a wood chisel automatically parallel to the Universal Support. Safety stops prevent the tool from slipping off the stone and hurt your knuckles. Max tool width 76 mm (3"). Read more »

SVH-320 Planer Blade Attachment

Planer Blade Attachment

For blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and ground in two steps. The grinding depth can be set within 0,1 mm (0,004"). Min width of blade 13 mm (½"). Read more »

SVP-80 Moulding Knife Attachment

Moulding Knife Attachment

For all shapes and makes of moulding knives with 24, 30 or 38 mm distance between guide holes. Sharpens the face of the blade and therefore any shapes can be done. Max width of blades 100 mm (4"). Read more »

DBS-22 Drill Bit Sharpening Attachment

Drill Bit Sharpening Attachment

With the Tormek patented attachment for drill bits DBS-22 you can now sharpen your drill bits with the highest precision. Read more »