Sharpen small knives with SVM-00
SE Patent No. 537247, EPO, USA Patent pending
The new Small Knife Holder SVM-00 from Tormek can handle those really small knife blades which up until now, have been difficult to sharpen.
Normally they have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
You can now sharpen knives of different shapes for whittling, chip carving and detail work. Even folding pocket knives can be sharpened with perfect control.
Since it is the handle of the knife that is mounted in the SVM‑00 holder, there is really no limit to how small a blade you can sharpen.
It works in conjunction with the Knife Jig SVM-45.
Check out the film above!
Note Some knives are difficult to mount in line with the Guide Bar. Knives can also be sharpened with asymmetrical bevels. In these cases, and if the angle is not correct when you turn over to sharpen the second side, you can adjust it separately with the Micro Adjust.
It consists of a Guide Bar (1), a Handle Grip (2), and an Adjustable Clamp (3). The knife handle is fastened with the Knob (4). The holder is designed to securely hold the knife without damaging the handle.
The Guide Bar (1) mounts in the jaws of the Tormek Knife Jig SVM-45 and you sharpen using the same technique as for the knife jig. The exact edge angle is set by turning the Adjustable Stop (6) or using the Micro Adjust on the Universal Support.