TORMEK T-7

Tormek T-7

TORMEK T-7 is designed for the toughest work and can run continuously without overheating. You can sharpen practically all common edge tools to a perfect edge. The Tormek Original Grindstone sharpens all qualities of steel including HSS. The maintenance free industrial quality motor with ball bearings, maintains a constant speed even under full load. Stainless steel main shaft with EzyLock. Sturdy steel frame with ED coating for best protection. Extra wide water trough, magnet for collecting steel particles and removable water chute for long tools. Plus, a number of accessories included in the package, see below.


Dimensions: Width 270 mm (10 5/8"), Depth 250 mm (10"), Height 325 mm (12¾")
Weight: Shipping weight 16.8 kg, Machine only 14.2 kg
Grindstone: Tormek Original Grindstone, Aluminium oxide, 250×50 mm (10"×2") 90 rpm, torque 14.7 Nm
Leather Honing Wheel: 220×31 mm (8 5/8"×1¼")
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Steel housing 3 mm (1/8") with ED base coating and a tough powder coat finish.
Motor: Industrial single phase, 200 W (input)
230 V, 50 Hz or 115 V, 60 Hz. Continuous duty, Maintenance free.
Silent running, 52 dB. 25,000 hour life


TT-50   SE-76

Truing Tool Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone.

 

Square Edge Jig For plane irons and wood chisels. Max tool width 76 mm (3"), max tool thickness 9 mm (3/8"). Safety stops prevent the tool from slipping off the stone.

SP-650   LA-220

Stone Grader The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.

 

Leather Honing Wheel After sharpening you hone away the burr and polish the bevel to the finest edge on the leather honing wheel.

US-105   Micro Adjust with scale

Universal Support with acme thread Round section without flat machining makes it faster to change position.

 

Micro Adjust with scale For a predetermined cutting depth when using the TT-50 Truing Tool.

Stainless steel hardware   NVR switch

Stainless steel main shaft Prevents from rust and wear on bearings. With Tormek EzyLock you need no tools for mounting and dismounting the stone.

 

NVR Switch Providing safety in the event of an interruption of power.

Water Chute for Long Tools   Water Chute for Long Tools

Water Chute for Long Tools For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools.

Corrosion Protection   Magnet Cleans the Stone of Steel Particles

Corrosion Protection The sturdy steel housing on Tormek T-7 is treated with an Electro­deposition (ED) coating which provides a superior corrosion protection and forms the foundation for the tough powder coat paint finish.

 

Magnet Cleans the Stone of Steel Particles
The water trough incorporates a strong magnet, which attracts the steel particles worn from the tools being sharpened. This keeps your stone clean and cutting more freely.

 

The T-7 model is delivered with these accessories

SE-76 Square Edge Jig

Square Edge Jig

TT-50 Truing and Dressing Tool

Truing and Dressing Tool

SP-650 Stone Grader

Stone Grader

WM-200 AngleMaster

AngleMaster

PA-70 Honing Compound

Honing Compound

HB-10 Handbook

Handbook

Tormek DVD

Tormek DVD

7+3 year warranty
Certificates T-7