Topic: T7 Drive Wheel

[Workbench]

The rubber drive wheel on my T7 keeps building up rubber compound on the motor shaft causing slippage.  I have to remove the honing wheels and clean the motor drive shaft after approx. every two to three hours of use.  Use is "not" continuous, 2-3 minutes here, 5 minutes there, etc.  I have sanded the rubber drive wheel as suggested in other post, but it hasn't resolved the problem.  How do I obtain a replace under warranty?

[Jeff Farris]

It will do this less after time.  Give it a while before replacing it with one that will do exactly the same thing.