In the Shop > Wood Turning
Svd 185 will not let me stay on grindstone when doing a 1/2 Ellsworth grind
Jeff Farris:
Guys, I hadn't thought about this until now.
Check to make sure that your jigs have the correct positioning on the arrow.
See this page: http://www.tormek.com/en/jigs/svd180/svd185_arrow.php
onewaywood:
Thanks Jeff,,, with my 3/4 inch 23 " long bowl gauge, it is physicaly impossible to do that grind, set at 75mm ,6,A thats what I mean about not understanding.The water tray is in the way of the jig, then when you pass that the wheel is in the way of the jig the handle on the tool is way up in the air HELP...... a video would probably help a'lot of people that aren't even asking.
onewaywood:
I guess the best way to explain it is. When set correctly the tool is so far away from the stone it wont even reach it...
Jeff Farris:
Could you snap a picture of the way you're trying to do it and e-mail it to me?
jeff at sharp tools usa dot com (no spaces and @ for at, . for dot)
onewaywood:
Thanks Jeff, setting aside my type A personality, I figured it out. I won't bore you with the details . Thanks for all your help
P.S. a video would still be great.............
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version