Tormek T-7

Note: Tormek T-8 has replaced Tormek T-7.

Tormek T-7 is designed for the toughest work and can run continuously without overheating. You can sharpen practically all common edge tools to a perfect edge. The large grindstone gives you stability and a wide sharpening surface well suited also for larger tools.

The T-7 comes equipped with the Tormek Original Grindstone which sharpens all qualities of steel including HSS. With the included Stone Grader, you can alter the stone surface from 220 grit to about a 1000 grit surface, giving you two different cutting qualities from the same grindstone. You can start with 220 grit, continue with 1000 grit and then move to the leather honing wheel where you remove the burr and polish the edge to its final sharpness.

Horizontal and vertical positions for the Universal Support enable sharpening towards or against the wheel turning direction depending on what is best suitable for the tool you are to sharpen.

The maintenance free industrial quality motor with ball bearings, maintains a constant speed even under full load. Sturdy steel frame with ED base and powder coating for best protection.

Features include stainless steel main shaft with EzyLock, extra wide water trough, magnet for collecting steel particles and removable water chute for long tools. Plus, a number of accessories included in the package: SE-76 Square Edge jig, TT-50 Truing Tool, SP-650 Stone Grader, WM-200 AngleMaster, PA-70 Honing Compound and the Tormek Handbook on sharpening.

Show more