Tormek Community

In the Shop => Planer Blade Sharpening => Topic started by: dusmif on May 13, 2021, 08:58:55 pm

Title: Getting the angle set correctly with the SVH-320
Post by: dusmif on May 13, 2021, 08:58:55 pm
Hi, any hints how to set the right angle for planner blades please?
Thank you.
Title: Re: Getting the angle set correctly with the SVH-320
Post by: RickKrung on May 14, 2021, 05:09:44 am
What does the manual say? 
Title: Re: Getting the angle set correctly with the SVH-320
Post by: dusmif on May 14, 2021, 08:58:00 am
That is my problem, because my manual is in German.  :(
Title: Re: Getting the angle set correctly with the SVH-320
Post by: jvh on May 14, 2021, 09:40:24 am
That is my problem, because my manual is in German.  :(

Hello dusmif,

see links.

Manual: Instruction SVH-320 EN (https://www.tormek.com/media/1911674/hb-10-en-v104-svh-320.pdf)

Tormek's video: Tormek Planer Blade Attachment SVH-320 (https://www.youtube.com/watch?v=MfBH5vtVVdU)
Highland Woodworking review: Tormek Planer Knife Jig SVH-320 (https://www.youtube.com/watch?v=qJFTi_YAM5w)

jvh
Title: Re: Getting the angle set correctly with the SVH-320
Post by: dusmif on May 14, 2021, 10:25:57 am
Thanks mate, that is great, much appreciated.
Title: Re: Getting the angle set correctly with the SVH-320
Post by: Ken S on May 14, 2021, 05:55:50 pm
Welcome to the forum, Dusmif. Don't forget that you always have the option of emailing support (support@tormek.se). From personal experience, I can say that support is very helpful.

Keep us posted.

Ken
Title: Re: Getting the angle set correctly with the SVH-320
Post by: dusmif on May 14, 2021, 06:33:25 pm
Thank You.
Alf.