Author Topic: Which jig(s)?  (Read 4726 times)

Offline richinva

  • Newbie
  • *
  • Posts: 6
  • I'm a sharp craftsman!
    • View Profile
Which jig(s)?
« on: December 11, 2005, 05:29:21 am »
Which jigs to use with which tools?

1/8" and 1/4" spindle gouges, 1/8" parting tool, 1/4" round nose scraper, and 1/4" skew chisel.  Also my 3/4" roughing gouge.  

Do I need two different jigs?

Thanks.

Rich

Offline Jeff Farris

  • Hero Member
  • *****
  • Posts: 1272
    • View Profile
Re:Which jig(s)?
« Reply #1 on: December 11, 2005, 02:52:47 pm »
1/8" and 1/4" Spindle Gouge = SVS-50 for a straight grind or the SVD-185 for a fingernail grind.

1/8" parting tool, 1/4" skew, and 3/4" roughing gouge = SVS-50

round nose scraper = SVD-110
Jeff Farris

Offline richinva

  • Newbie
  • *
  • Posts: 6
  • I'm a sharp craftsman!
    • View Profile
Re:Which jig(s)?
« Reply #2 on: December 12, 2005, 10:24:50 am »
Jeff,

Thanks for the reply.  You should be seeing an order at your website.

Merry Christmas!!

Rich