Author Topic: Other TTS-100 presets  (Read 1549 times)

Offline gjamison

  • Newbie
  • *
  • Posts: 4
  • I'm a sharp craftsman!
    • View Profile
Other TTS-100 presets
« on: February 26, 2016, 04:43:41 pm »
Tormek has done a great job in sifting through a limitless range of preset parameters (P, JS and distance) to present a set a concise recommended/concensus list for use with gouges and skew chisels.  As an added suggestion, could Tormek publish other combinations of P and JS for the two standard distances on the TTS-100 for gouges and skews.  Even the equations or some graphs to consult would help.  For example, there is a preset for a radius skew with say a 35 degree bevel using a different P, for one or both of the holes.  This would be a great service to users, and no doubt the equations were developed for design of the TTS-100, and selection of small set of presets.
Thanks