Author Topic: Using plastic cutting board  (Read 3808 times)

Online Sharpco

  • Sr. Member
  • ****
  • Posts: 413
    • View Profile
Using plastic cutting board
« on: November 29, 2017, 11:54:44 pm »
There are two main types of cutting boards. One is wood, the other is plastic. If I use a plastic cutting board, do I have to set a larger edge angle?

Offline kwakster

  • Jr. Member
  • **
  • Posts: 70
    • View Profile
Re: Using plastic cutting board
« Reply #1 on: November 30, 2017, 02:07:00 pm »
Personally i don't do that, i always set the edge angle that works best for a specific knife (and it's user)
Now that edge will last longer on a good end grain wooden cutting board, as plastic in general tends to be more abrasive on knife edges.
Especially those thick plastic boards used in commercial kitchens here in Europe are real edge killers.

Now there seem to exist high quality plastic cutting boards that are gentle on knife edges, and those are made from a material called polyvinyl acetate.
These boards are mostly only used in Japanese commercial kitchens, and so far i've never seen them where i live.



Offline wootz

  • Hero Member
  • *****
  • Posts: 509
    • View Profile
    • knifeGrinders.com.au
Re: Using plastic cutting board
« Reply #2 on: December 03, 2017, 07:36:30 pm »
Kwakster is talking of the Japanese polyvinyl acetate Yoshihiro Hi-Soft cutting board - it doesn't dull the edge, but costs a little fortune.

My quick test on the PT50 shows that 20 slices on a plastic, glass, marble and bamboo cutting boards reduce sharpness by 3 times, e.g. from 90 BESS to 270 BESS.

Offline RichColvin

  • Hero Member
  • *****
  • Posts: 735
  • Ornamental Turner
    • View Profile
    • SharpeningHandbook.info
Re: Using plastic cutting board
« Reply #3 on: December 04, 2017, 03:04:14 pm »
Wootz,

That is interesting.  How does that compare with wooden cutting boards ?

Kind regards,
Rich
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

Offline wootz

  • Hero Member
  • *****
  • Posts: 509
    • View Profile
    • knifeGrinders.com.au
Re: Using plastic cutting board
« Reply #4 on: December 05, 2017, 01:18:35 am »
Good you asked, Rich.

As we now get 50 BESS or 0.1 micron edge on kitchen knives in volume sharpening - this is sharpness of the Gillette safety razor, my wife's kitchen Global knife was that sharp 3 days ago.

After use on a wooden board for 3 days, it now scores 90 BESS; if it were a plastic cutting boars, would have been 300 BESS I guess.

Our new breakthrough sharpening protocol is detailed in this thread on the BESS forum:
http://www.bessex.com/forum/showthread.php?tid=209&pid=1602#pid1602
« Last Edit: December 05, 2017, 06:42:12 am by wootz »

Online Sharpco

  • Sr. Member
  • ****
  • Posts: 413
    • View Profile
Re: Using plastic cutting board
« Reply #5 on: December 05, 2017, 01:29:00 am »
Good you asked, Rich.

As we now get 50 BESS or 0.1 micron edge on kitchen knives in volume sharpening - this is sharpness of the Gillette safety razor, my wife's kitchen knife was that sharp 3 days ago.

After use on a wooden board for 3 days, it now scores 90 BESS.

Our new breakthrough sharpening protocol is detailed in this thread on the BESS forum:
http://www.bessex.com/forum/showthread.php?tid=209&pid=1602#pid1602

Amazing!

Offline Herman Trivilino

  • Hero Member
  • *****
  • Posts: 1990
  • Houston, Texas
    • View Profile
Re: Using plastic cutting board
« Reply #6 on: December 11, 2017, 01:42:12 pm »
I would think that slicing technique would be very important. Most people use dull knives in their kitchens and get used to pressing hard when slicing. Give them a sharp knife and the habit continues. Professional chefs are used to using sharp knives and would not suffer from this malady.
Origin: Big Bang

Offline Crusty

  • Newbie
  • *
  • Posts: 23
    • View Profile
Re: Using plastic cutting board
« Reply #7 on: December 12, 2017, 06:50:12 am »
Good point Herman, My wife tends to chop  :o so the whole blade makes contact with the board at the same time  :'( They don't last very long in her hands, I tend to slice with only the tip of the blade in contact with the board and naturally the edge retention is much better.
As a note, I have been using an old Jarrah cutting board that I made about 35 years ago, It was actually an off-cut from when i used to build staircases. Back in those days Jarrah had a better fire rating than steel and was used in fire stairs. As a cutting board it is still going great too

Offline Herman Trivilino

  • Hero Member
  • *****
  • Posts: 1990
  • Houston, Texas
    • View Profile
Re: Using plastic cutting board
« Reply #8 on: December 13, 2017, 01:57:26 pm »
This was years ago, before granite counter tops became popular. My parents remodeled and had new laminate counter tops. My mother asked me to verify that my father should use a cutting board rather than slice right on the counter top to avoid damaging it. As long as you use a gentle touch you're okay, but I bit my tongue to avoid taking sides!  ;)

Origin: Big Bang

Offline SharpenADullWitt

  • Hero Member
  • *****
  • Posts: 671
  • I'm a sharp craftsman!
    • View Profile
Re: Using plastic cutting board
« Reply #9 on: December 17, 2017, 05:01:03 pm »
Wootz,

Does wood type matter?

I know there are a couple different types of plastic cutting boards, some harder, some softer.  I also know there are wooden cutting boards of various species, as well as commercial ones that are man made types of wood (for examples look at some of the pizza cutting boards, thinnner)

I do know that slicing verse chopping does make a difference, as well as the user (saw someone who should know better, chopping a newly sharpened knife into a cutting board for no reason, made me cringe).  Slicing, sometimes one can rotate the food and never even make contact with the cutting board, but I wouldn't want to hold food I am chopping.
Favorite line, from a post here:
8)

Yeah you know Tormek have reached sharpening nirvana when you get a prosthetic hand as part of the standard package :/)