Author Topic: Laser Goniometer - Need Replacement  (Read 2737 times)

Offline jvh

  • Full Member
  • ***
  • Posts: 103
  • I'm a sharp craftsman!
    • View Profile
Re: Laser Goniometer - Need Replacement
« Reply #15 on: November 19, 2020, 08:12:50 pm »
Hands-free stand for LASER GONIOMETER VETAKO PRO

Hello,

interesting idea. Top plate is plastic, machined with a wood router?


So much work instead of using the model with magnets in.

Easy to say if you ignore differences between models and the reason why he chose Vetako Pro.  ;)

jvh

Offline Arthur

  • Newbie
  • *
  • Posts: 4
  • I'm a sharp craftsman!
    • View Profile
Re: Laser Goniometer - Need Replacement
« Reply #16 on: November 20, 2020, 08:33:19 am »
Hello!
First of all, thanks to the forum participants RickKrung and jvh, whose valuable comments helped me choose VETAKO PRO. Works great :)

For Hannsi1957! I really appreciate your work to improve the TORMEK users. I am planning several purchases in your store.
On the remark above, I want to say that despite the presence of a magnet, the VETAKO MASTER model still needs to be held in the hand during measurements.
In my experience, the manufactured stand for VETAKO PRO protects the device and the knife from accidental damage and is easy to use.

For jvh! The top panel consists of three layers of different materials glued together.
Bottom layer of 3 mm aluminum with cut-out along the inner contour VETAKO PRO - for stability.
The middle layer of plastic 3 mm with a cutout along the inner contour VETAKO PRO - to protect the device from scratches.
Top layer made of 3 mm plastic with a cutout along the outer contour of VETAKO PRO - to keep the device stationary.
« Last Edit: November 20, 2020, 08:36:31 am by Arthur »

Offline Hannsi1957

  • Jr. Member
  • **
  • Posts: 85
  • I'm a sharp craftsman!
    • View Profile
    • SchleifJunkies
Re: Laser Goniometer - Need Replacement
« Reply #17 on: November 20, 2020, 02:23:42 pm »
don't get me wrong arthur, that wasn't a criticism at all. i use the one with magnets and find it easy to use and since it has kept every knife clean so far, i don't see any need for such a design concept "for me". i didn't mean to criticize your wealth of ideas, on the contrary i am always surprised what ideas some people come up with.

Offline jasonstone20

  • Jr. Member
  • **
  • Posts: 50
  • I'm a sharp craftsman!
    • View Profile
Re: Laser Goniometer - Need Replacement
« Reply #18 on: November 26, 2020, 05:19:04 pm »
You can always make your own, I did and it works great.