Author Topic: Getting the angle set correctly with the SVH-320  (Read 1098 times)

Offline dusmif

  • Jr. Member
  • **
  • Posts: 88
  • I'm a learning craftsman!
    • View Profile
Getting the angle set correctly with the SVH-320
« on: May 13, 2021, 08:58:55 pm »
Hi, any hints how to set the right angle for planner blades please?
Thank you.

Offline RickKrung

  • Hero Member
  • *****
  • Posts: 1007
  • Maker
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #1 on: May 14, 2021, 05:09:44 am »
What does the manual say? 
Quality is like buying oats.  If you want nice clean, fresh oats, you must pay a fair price. However, if you can be satisfied with oats that have already been through the horse, that comes at a lower price.

Offline dusmif

  • Jr. Member
  • **
  • Posts: 88
  • I'm a learning craftsman!
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #2 on: May 14, 2021, 08:58:00 am »
That is my problem, because my manual is in German.  :(

Offline jvh

  • Full Member
  • ***
  • Posts: 140
  • I'm a sharp craftsman!
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #3 on: May 14, 2021, 09:40:24 am »
That is my problem, because my manual is in German.  :(

Hello dusmif,

see links.

Manual: Instruction SVH-320 EN

Tormek's video: Tormek Planer Blade Attachment SVH-320
Highland Woodworking review: Tormek Planer Knife Jig SVH-320

jvh

Offline dusmif

  • Jr. Member
  • **
  • Posts: 88
  • I'm a learning craftsman!
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #4 on: May 14, 2021, 10:25:57 am »
Thanks mate, that is great, much appreciated.

Offline Ken S

  • Moderator
  • Hero Member
  • *****
  • Posts: 7143
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #5 on: May 14, 2021, 05:55:50 pm »
Welcome to the forum, Dusmif. Don't forget that you always have the option of emailing support (support@tormek.se). From personal experience, I can say that support is very helpful.

Keep us posted.

Ken

Offline dusmif

  • Jr. Member
  • **
  • Posts: 88
  • I'm a learning craftsman!
    • View Profile
Re: Getting the angle set correctly with the SVH-320
« Reply #6 on: May 14, 2021, 06:33:25 pm »
Thank You.
Alf.