Author Topic: diamond tip dresser  (Read 2278 times)

Offline Stickan

  • Sr. Member
  • ****
  • Posts: 288
    • View Profile
Re: diamond tip dresser
« Reply #15 on: June 23, 2022, 04:03:21 pm »
Hi,
A diamond tip last's many stones lifetime if the user is careful. The model shown in the pictures was made before we had the adjustable nut on the support-bar as standard and I can see that it might have worn down faster than the set-up we have today with the TT-50 and US-105 with micro adjuster. It was more difficult to set it at a specific height.

They wear down faster when you remove a thick layer of stone. Then the stone wears down the copper from the side and the diamond will loosen faster. When I use a TT-50 I mostly set it around 1/2 step and rather go faster over the stone several times, and finish with the stone grader on its course side to smooth it out. Then the surface looks like a new stone too.

Luckily, I learn new things about our product too on a regular basis and I was told that diamonds can be up to 5mm in the tip, so more than we have learned in this tread.

Best,
Stig




« Last Edit: June 23, 2022, 08:13:29 pm by Stickan »

Offline mptvexl

  • Newbie
  • *
  • Posts: 13
  • I'm a sharp craftsman!
    • View Profile
Re: diamond tip dresser
« Reply #16 on: June 23, 2022, 04:56:08 pm »
To be fair to myself I was pretty easy going on the stone but there we are. M