It looks like you are using an older version of your browser and may not be seeing the Tormek website or other websites the way they are meant to be displayed. Please update your browser to the latest version.
If you can't change your browser because of compatibility issues, think about installing a second browser for browsing and keep the old one for compatibility. Ask your admin to update your browser if you cannot install updates yourself.
Watch this short film to see how the Tormek AngleMaster works and how you can use it for chisels as well as knives.
TIP The AngleMaster has two magnets so you can store it onto the side of the machine, and always have it close at hands when you need it. Applies to all Tormek models except 1200 and T-3. On Tormek T-4 you can attach it onto the machine plate which is made of metal.
The Tormek AngleMaster has two functions: you can use it to set the edge angle before sharpening or to measure the existing angle of a specific tool.
The edge angle can be set from 10° to 75°. The AngleMaster is designed to work on any grindstone diameter from 250 mm or 10" down to 150 mm or 6", so you can achieve an exact setting even as the stone wears.