Dimensions: Width 270 mm (10 5/8"), Depth 250 mm (10"), Height 325 mm (12¾")
Weight: Shipping weight 16.8 kg, Machine only 14.2 kg
Grindstone: Tormek Original Grindstone, Aluminium oxide, ∅ 250×50 mm (10"×2") 90 rpm, torque 14.7 Nm
Leather Honing Wheel: ∅ 220×31 mm (8 5/8"×1¼")
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Steel housing 3 mm (1/8") with ED base coating and a tough powder coat finish.
Motor: Industrial single phase, 200 W (input)
230 V, 50 Hz or 115 V, 60 Hz. Continuous duty, Maintenance free.
Silent running, 52 dB. 25,000 hour life
Warranty: 7 years + additional 3 years when you register.*

* Including professional use.

Made In Sweden

PA-70 Honing Compound

TT-50 Truing Tool

SP-650 Stone Grader

HB-10 Tormek Handbook

Material safety data sheet PA-70 EN

Magnet Cleans the Stone of Steel Particles. The water trough incorporates a strong magnet, which attracts the steel particles worn from the tools being sharpened. This keeps your stone clean and cutting more freely.

Tormek T-7

Note: Tormek T-8 has replaced Tormek T-7.

Tormek T-7 is designed for the toughest work and can run continuously without overheating. You can sharpen practically all common edge tools to a perfect edge. The large grindstone gives you stability and a wide sharpening surface well suited also for larger tools.

The T-7 comes equipped with the Tormek Original Grindstone which sharpens all qualities of steel including HSS. With the included Stone Grader, you can alter the stone surface from 220 grit to about a 1000 grit surface, giving you two different cutting qualities from the same grindstone. You can start with 220 grit, continue with 1000 grit and then move to the leather honing wheel where you remove the burr and polish the edge to its final sharpness.

Horizontal and vertical positions for the Universal Support enable sharpening towards or against the wheel turning direction depending on what is best suitable for the tool you are to sharpen.

The maintenance free industrial quality motor with ball bearings, maintains a constant speed even under full load. Sturdy steel frame with ED base and powder coating for best protection.

Features include stainless steel main shaft with EzyLock, extra wide water trough, magnet for collecting steel particles and removable water chute for long tools. Plus, a number of accessories included in the package: SE-76 Square Edge jig, TT-50 Truing Tool, SP-650 Stone Grader, WM-200 AngleMaster, PA-70 Honing Compound and the Tormek Handbook on sharpening.

Leather Honing Wheel. After sharpening you hone away the burr and polish the bevel to the finest edge on the leather honing wheel.

Universal Support with acme thread. Round section without flat machining makes it faster to change position.

Micro Adjust with scale. For fine adjustment when using Tormek jigs and for a predetermined cutting depth when using the TT-50 Truing Tool.

Stainless steel main shaft. Prevents from rust and wear on bearings. With Tormek EzyLock you need no tools for mounting and dismounting the stone.

NVR Switch. Providing safety in the event of an interruption of power.

Water Chute for Long Tools. For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), you can add the water chute.

Corrosion Protection.
The steel housing is treated with an Electrodeposition (ED) coating which provides a superior corrosion protection and forms the foundation for the tough powder coat paint finish.

Back | Tormek T-7

PA-70 Honing Compound

TT-50 Truing Tool

SP-650 Stone Grader

HB-10 Tormek Handbook

WM-200 AngleMaster

System Leaflet EN

Parts breakdown T-7/2000 EN

Material safety data sheet PA-70 EN

Tormek T-7

Enhance your Tormek T-7

Grinding Jigs

Accessories

Grinding Wheels

Kits