Welcome to Tormek

Based on your location, we suggest the following language settings

You are free to change this at any time

Tormek

WM-200 AngleMaster

Set the correct sharpening angle easily and precisely

The Tormek WM-200 AngleMaster has several smart features. You can use it to set the jig before sharpening, or to measure an existing bevel angle of a tool. It can also be adjusted to the diameter of the grinding wheel, and you can easily set the sharpening angle for sharpening on the side of a diamond grinding wheel as well.

Play video

Overview

Why WM-200 AngleMaster?

  • Measures the existing bevel angle of the tool.
  • Set the jig to the desired sharpening angle before sharpening.
  • Easy to use.
  • Works on grinding wheels from 150 mm (5 7/8") to 250 mm (9 7/8") in diameter.
  • Works with the Tormek T-8, Tormek T-4 and older models.

Sharpen at exactly the right angle

The sharpening angle can be set from 10° to 75° with the WM-200 AngleMaster. The AngleMaster is designed to work on all grinding wheels with a diameter from 150 mm (5 7/8") to 250 mm (9 7/8"). So you get an accurate setting even if you have a grindstone that's been worn down a lot.

The right angle at your fingertips

The WM-200 AngleMaster has two magnets so you can easily place it on the machine so that it's always close to hand. This applies to all Tormek models except for the 1200 and T-3. On the Tormek T-4, you can place the AngleMaster on the machine plate, which is made of metal; and on the Tormek T-8 you can place it on the plate mount included.

Specs and details

Weight

Shipping weight 0.10 kg (0.22 lb)

Color

Gray/black

Material

Plastic

Warranty

2-year warranty

Made in Sweden

Video

How to use the WM-200 AngleMaster

This short video shows you how the WM-200 AngleMaster works and how you can use it for both chisels and knives.

Included in the box

The WM-200 AngleMaster comes fully assembled and ready to use.

  • Instructions for the WM-200 AngleMaster.