It looks like you are using an older version of your browser and may not be seeing the Tormek website or other websites the way they are meant to be displayed. Please update your browser to the latest version.
If you can't change your browser because of compatibility issues, think about installing a second browser for browsing and keep the old one for compatibility. Ask your admin to update your browser if you cannot install updates yourself.
The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks.
Alan Holtham, English woodturner and journalist, tries the Tormek Japanese Waterstone SJ-250 for ultra-sharp edges (also available for T-4 and 1200 models as SJ-200) and the Tormek Blackstone Silicon SB-250 for faster cutting action on HSS and exotic alloys.
The Tormek Japanese Waterstone with 4000 grit delivers a mirror finish with hardly any visible marks. The fine surface polishes the edge and creates the ultimate shiny finish. If you are looking for that razor-sharpness, this is the grinding wheel for you!
This waterstone excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior surface finish is required.
Its unique composition gives the stone an extremely long life. Since the surface left by the Japanese Waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel.
You should clean the stone surface of steel particles every minute or so with the fine side of the Stone Grader SP-650. Do not use the coarse side of the Stone Grader on the Japanese Waterstone.
SJ-200 fits Tormek T-4 and previous Tormek models with a 200 mm stone diameter.
Since the stone is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping a tool. A distinction should be made between the shaping and sharpening of a tool. When shaping you remove steel to achieve the shape and edge angle you want. When sharpening you just touch up an existing shape to renew the sharpness.